Expert Answers about Chevrolet Hand Tools

• Tools Needed to Install Draw-Tite 2-Inch Hitch 76227 on Subaru Outback Wagon
• If you refer to page 2 of the linked instructions for Draw-Tite 2-Inch Hitch # 76227 you'll be able to see a complete list of the tools needed for installing it. Most of the items are basic hand tools and the one special item, a torque wrench, can often be borrowed or rented from a local auto supply shop. I also linked an article and an install video showing a 2016 model year Outback.
  view full answer...


• How Easily Does Lend-a-Hand Folding Handle Fold
• The Lend-a-Hand # AM-300 folds by simply pulling up on the handle and folding it to one side or the other. There are no tools or bolts necessary.
  view full answer...


• Tool Needed to Drive Hex Drive of Dutton-Lainson Hand Winch # DL11001
• To drive the hex drive of the Dutton-Lainson Hand Winch # DL11001 does not require a special tool to do so. What you need is just a 5/8 socket which you most likely already have and you'd be set.
  view full answer...


• Tips for Removing Lenses on Optronics LED RV Interior Light # RVILL34
• On Optronics LED RV Interior Light # RVILL34 grab the lens and squeeze in while at the same time pulling it away from the center and a little upward. Once the lenses are removed you will have access to the LED boards and the mounting screws holding the light assembly to the surface its mounted to. I do not recommend using any tools to remove the lenses for a couple of reasons. First, if using a tool it focuses the force applied to a smaller area than your hand. And second with a tool...
  view full answer...


• What Tools are Needed to Put Together the Surco Spare-Tire-Mounted Cargo Basket
• To put together the Surco spare tire mount cargo carrier # SPSJ4319 you will just need basic hand tools like screwdrivers, wrenches/sockets, and that is really about it. To mount it you will need to use the tire tool to take the lug nuts off of the spare tire. Other than that there are no special tools needed for installation. I have included a couple of video links on this carrier for you.
  view full answer...


• Are there Specific Torque Values for the Hardware in Timbren Help Spring Kit TFR1504E
• I spoke with my contact over at Timbren and he said there isn't a torque value for the hardware when installing kit # TFR1504E. He said to just tighten them until snug using regular hand tools. I know that is very subjective but tight using hand tools is what to shoot for.
  view full answer...


• Tools Needed to install Curt Hitch # C31033 on 2014 Jeep Grand Cherokee AWD Front Hitch
• The Curt front hitch part # C31033 is a confirmed fit and does not require specialized tools to install. If you have most basic hand tools you'd be set. I attached a picture that I took from the install instructions that shows the tools required.
  view full answer...


• What Tool is Needed to Remove the Castle Nut on a Trailer Axle
• The spindle nut on a trailer axle should not be difficult to remove, it only requires a very small amount of torque. It should for the most part just turn off by hand after the retainer is removed whether it's a clip or pin. We don't have a specialty tool for this unfortunately, I usually just use a large set of channel lock pliers and I do this mainly to avoid getting grease all over my hands. That's the way I have always done them since most people don't have the larger sockets these...
  view full answer...


• Tools Needed to Install B&W Custom Base Rails and Installation Kit # BWRVK2401
• When installing the B&W Custom Base Rails and Installation Kit # BWRVK2401 on your 2011 Ford F-250, you will want to have the following items on hand: Impact wrench or ratchet with 15/16 inch and 3/4 inch sockets 15/16 inch and 3/4 inch box end wrench A drill and 1/8 inch and 9/16 inch drill bits Along with these particular tools, you will want a hammer, flashlight, tape measure, eye protection, torque wrench and a center punch. I have attached an installation video on a 2014 Ford F-250...
  view full answer...


• Installation of Rhino-Rack Roof Rack Tracks on 2003 VW Eurovan MV with Rivets
• The Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 # RRRTV168 are not designed to be mounted in the rain channels, but rather close to them. You still want rain to move away from your doors and not settle in areas you've drilled holes, so the actual gutter is not ideal. However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion...
  view full answer...


• Tools Required to Install Draw-Tite Class III Hitch 76138 on 2016 Mazda CX-5
• Trailer hitch installation on your 2016 Mazda CX-5 will require basic hand tools like a 3/4-inch socket and ratchet, and also a torque wrench like # ALL944001. The linked instructions tell you all the tools required to mount Class III Hitch # 76138 on your Mazda CX-5. I also included a helpful article with tips for an easier hitch install. If you'd like an anti-rattle lock for use with this hitch (to secure a ball mount or bike rack) you might consider the Anti-Rattle Trailer Hitch Receiver...
  view full answer...


• How To Trim Underbody Panel on 2013 Honda CR-V For Installation of Curt Trailer Hitch # C13119
• To trim the underbody panel on your 2013 Honda CR-V for the installation of a Curt Trailer Hitch Receiver # C13119, I recommend marking the area that needs to be cut to start with. I have provided a graphic showing where this section is and the dimensions of the area that needs to be removed. I would then use the saw attachment for a rotary tool to cut the section from the underbody panel. I have provided a link to the instructions for this trailer hitch which provides you the types of...
  view full answer...


• How to Manually Turn a Sidewinder 5th Wheel King Pin
• The turret on a Sidewinder like the Sidewinder 5th Wheel King Pin with Rotating Turret part # RP34FR will be fairly difficult to turn by hand especially if it is new. It will loosen up over time but it will still be rather difficult to turn by hand. If you need to manually turn the turret you may will want to obtain a large/long pry bar and wedge it into the mounting bracket while applying pressure to turn the turret. Unfortunately they do not make any sort of tool for this but a large/long...
  view full answer...


• Tools Needed to Install Roadmaster Rear Anti-Sway Bar # RM-1139-149
• The installation manual for the Roadmaster Rear Anti-Sway Bar # RM-1139-149 along with the Extended U-Bolt Kit # RM-590050-10 simply calls for a torque wrench and "general hand tools". When we installed this kit on the 2017 Ford F-53 we used a 13/16 inch socket, a 5/16 inch socket, a 15/16 inch wrench/socket, an 18mm wrench/socket, and a 16mm socket. I have attached this installation video below that you can also check out.
  view full answer...


• Is Demco DM9713093 Kar Kaddy Tow Dolly Shipped Fully Assembled
• The Demco # DM9713093 would be delivered partially assembled. The frame, the tongue, ramps and fenders are all sub-assemblies that would need to be installed to the dolly as discussed on page # 25 in the instructions I've linked for you. The tow dolly features a disc brake system that is superior to electric or hydraulic surge brakes and is the model I most often recommend. Assembling the dolly requires basic hand tools and is uncomplicated if the instructions are closely followed. Someone...
  view full answer...


• Can the Westin HDX Grille Guard be Installed at Home on a 2013 Toyota Tundra
• The Westin HDX grille guard # 57-2235 fits all models of the 2013 Toyota Tundra so there should be no problem with your double cab 4x4. Installation is straight forward and you can perform this installation at home with hand tools.
  view full answer...


• Availability of Hitch Installation Video for Curt Hitch # C11282 on 2013 Chevrolet Cruze
• We do have an installation video to show you the process of mounting Curt hitch # C11282 on a 2013 Chevrolet Cruze. The video is linked for you. I also included a helpful article that provides additional tips for an easier installation. The written instructions for the hitch are also linked for you and you can review these to see the list of tools required, which include basic hand tools as well as a torque wrench like # ALL944001.
  view full answer...


• What Is Needed To Install the Roadmaster Comfort Ride Leaf Spring Suspension Kit
• Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3 comes with everything that you need for installation expect for tools. I have however listed the tools needed for you below. - General Hand Tools - 12” Long 5/16” Drill Bit - 9/16” Socket and Wrench - 3/4” Socket and Wrench - Torque Wrench - Blue Threadlocker part # LT37418 In regards to bearings and seals, the Lippert 7K Axle will use part # BK3-200.
  view full answer...


• What Tools Are Required To Install the Draw-Tite Hitch 36660 On a 2019 Ford EcoSport
• In order to install the Draw-Tite Trailer Hitch Receiver part # 36660 on a 2019 Ford EcoSport you will need the following tools. - Ratchet - 5.5mm, 10mm, 15mm, 17mm, and 3/4" Sockets - Utility Knife - Marker - Torque Wrench - Pry Bar - 6" Socket Extension - Tape Measure I will say that the majority of basic hand tool sets will have all of the above components needed to install the trailer hitch except for the toque wench. However, the torque wench can be rented from a local auto parts...
  view full answer...


• What Tools are Needed to Install Firestone Coil-Rite Suspension on a 2013 Hyundai Santa Fe
• If you look at the isntructions I have linked for the Firestone kit # F4170 you can see what tools you will need. First, you will need a jack to jack up the vehicle, jack stands to rest the frame of the vehicle on, and wheel chocks to prevent the vehicle from rolling. You will also need a drill and a 7/16 drill bit. A tubing cutter is also recommended, # AL10530, because the air lines must be cut as straight as possible. You can push in the air bag by hand or by using a blunt tool such...
  view full answer...